Kywoo Tycoon Max X-Linear Rail DIY 3D Printer with Larger Building Size 300*300*230mm
Subcribe to back in stock notification
Got two printers. Both worked out of the box although the first needed work on the Y axis. Upgraded the cooling using my own designs to 40mm fans on both printers for both hot end cooling and part cooling.
The stock cooling may be adequate for PLA, but borderline or not at all for higher temp plastics.
It is imperative to secure the bed cables to the carriage underneath. They flex too much and will break quickly!! I used electric tape, a zip tie, and zip tie anchor.
Got the printer to communicate wirelessly with Cura. Worked great, just follow the instructions.
To get the wireless to work, first update the OS using Robin_nano35.bin file.
THEN update the wireless using the KWWifi.bin file. The instructions are wrong in stating to update the wifi first.
I also had to increase the bed touch distance setting from -1.6 to ~1.75 to get better bed adhesion. Do this slowly, your results will vary according to how your touch sensor is installed. Reset the touch distance then test using a piece of paper after homing.
You will also need to examine adding bed adhesives because the coating seems to work only for the first few prints, but at the price... Who Cares?
Been using them quite a lot and printing very good prints at 0.1mm layer levels!
Everyone listen up, the kywoo3D is super easy to setup!
Easy to load and unload filament!
One touch print from sim, automatically homes, levels and starts printing!
Beautiful quality 3D printing!
My favorite in a few minutes glass bed is cool parts slide off, no scraping!
Thank you for the Christmas special l was able to buy one.
GOD bless your workers and company!
I am an experienced 3D printer hobbiest/small business owner. I have used many printers professionally and privately. This printer was by far one of the quickest from open box to filament laid down on the bed. The printer needed next to ZERO calibration, which is unheard of from all the other printers I own (10 as of now). The User GUI is a little clumsy, but I plan on looking at the firmware updates and seeing if It makes it any better. The Z axis is not silent when moving long distances, but overall the noise coming from the printer is minimal. Slicing prints was easy, and I could almost use a default profile. The instructions are very good and thorough. Auto bed leveling works well out of the box, and no adjustment was really needed to the belts nor the bed to get the first print going. Lots of spare parts sent in the box as well. for the sale price i got it at it is 100% worth it, and will be a go to printer for a long time. If someone has the extra room in their budget to go for something quite a bit nicer than an Ender 3, I would fully recommend this printer to be that choice.
As a beginner I am very satisfied
Arrived dead. Printer is a paperweight. Have attempted multiple times to contact company with response. When the bed heats up the printer shuts down.
Kywoo Tycoon Max 3D Printer Advantages:
1.Powerful Extruder Kit Redesigned
The most powerful design of Tycoon is the Nozzle kit we select, Unlike other normal 3d printers, the extrusion and heat dissipation structure on the 3d printer are seamlessly integrated to avoid vibration and terrible wear, especially the cool red rotate wheel design makes the filament easier to feed-in. With this, you can better view the situation of printing in real-time, make sure of the model can be perfectly print-out, and the quality of the models can be highly.
2.Unique & Elegant Appearance
Upgraded "DIY pro" frame structure design with complete accessories set, neat & elegant appearance gives you a unique user experience different from other common DIY 3d printers, no exposed wires provide you a safer working environment.
Leave the time sink of manual leveling behind, Save time and maximize accuracy and print quality with auto-leveling - the Kywoo makes adjustments automatically as you print. Adjustable foot mats add further stability to your printing.
4.Reliable Wifi Connection
The Wifi function allows files to the printer can be transferred via Cura from your desktop or laptop and print quickly, also, Tycoon 3d printer is Fully-compatible with both SD and TF cards - no card adapters required. (This function is not in the Beta version machines, but will be shown on the next batch machines.)
5.Stable X-Axis Linear Bearings
A stable X-axis linear bearings structure, dual Z-axis, and gantry frame improves accuracy by 30% vs traditional pulley systems. These features combine to greatly increase stability and reduce shaking, resulting in more effective, higher-quality printing.
6.100% Stable Ensured, No Wobbling & Shake Anymore
We are making a difference, Unlike other 3d printers, the structure of the tycoon 3d printer is specially designed with Double Z-axis, Double Y-axis, Synchronous belt, and Double Gantry structure for 100% stable ensured, No Wobble & Shake Anymore.
7.Powerful 32-Bit Silent Mainboard
Most of the bacis DIY 3d printers on the market come with the normal mainboard, the "whining" and "whirring" noises come out while printing might drive you crazy frequently. The Tycoon 3d printer is specially customized with a 32-bit TMC2208 Silent Motherboard, higher speed processing, stronger expansion, Lower Decibel provides you a quiet working environment and higher print quality. No disturbing problem and failure models happened anymore while printing.
8.Color HD Touch Screen With 9 Languages Supported
The Tycoon 3d printer works perfectly with the sensitive HD touch screen, Clear and exquisite icons design make it look more detailed and well-executed. truly achieves simple operation and better responsiveness; for better user-experience, we designed to add9 more foreign languages, make it more selectable and convenient for most of users.
Tycoon Max 3D Printer Parameters
|Model Type||Tycoon Max 3D Printer|
|Molding Technology||FDM(Fused Molding Manufacturing)|
|Nozzle Diameter||Standard 0.4mm|
|Working Mode||USB/SD Card|
|Slice Software||Cura/Repetier/Simplify 3D|
|Power Supply||Input: AC 115/230V 50/60 Hz Output:DC 24V|
|Resume Printing Function||Yes|
|Language Selection||Yes, Support five Languages|
|Operating System||Windows XP/7/8/10 MAC/Linux|
|Max Printing Speed||Up to 80-100mm/s|